SHOWER FAULTS

Shower Repair in Poole

A shower that leaks, loses flow or will not run properly can quickly disrupt the day. We provide shower repair in Poole for the plumbing side of showers in homes and businesses, checking the supply, connections, controls and fittings to find the cause and repairing or replacing the affected parts.

Call 01202 125678 to describe the fault, or request a free quote. Help is available 24/7.

WHAT WE SEE

Common Shower Plumbing Problems

Leaks and Drips

A dripping shower head, a hose leaking at its connections or water outside the enclosure can all be signs of a problem. Our article on why a shower may keep dripping after it is turned off explains when this is normal.

Weak or Uneven Flow

Flow that is weaker than usual, spluttering or uneven may relate to the shower, its fittings or the supply.

Controls That Do Not Work Normally

A control that is stiff, will not shut the water off fully or no longer adjusts as expected may point to a worn internal component.

Temperature That Keeps Changing

Water that runs too hot, too cold or swings between the two can have several causes, which is why it needs proper assessment.

LEAKS AND CONNECTIONS

Shower Leaks and Connection Problems

Water where it should not be is one of the most common reasons people ask for shower repair.

A leak may come from the shower head, hose, riser rail, shower valve or the supply pipework behind the wall. Water outside a shower can also come from a worn seal, the tray or the screen, so it does not automatically mean the pipework is leaking.

If the problem turns out to be a leak elsewhere in the property, our water leak repair page explains how wider leaks are traced and repaired. Any damage to tiles, flooring or other finishes may need separate attention.

FLOW AND CONTROLS

Poor or Changing Shower Flow

Weak or changing flow can have several causes. Limescale in the shower head, a damaged hose, a partly closed isolating valve, a worn valve part or the supply may all play a part.

Low flow does not necessarily mean low water pressure or a blockage, and it does not always mean the shower itself is faulty. Our article on why a shower may be losing pressure explains the common causes.

Mixer Shower and Control Problems

Mixer showers blend hot and cold water through a manual or thermostatic valve. Over time, cartridges and seals can wear or be affected by limescale, which may make controls stiff, stop the shower shutting off fully or change how the temperature responds.

Parts vary by make and model, so the valve needs checking before deciding on a repair.

Why Shower Temperature Problems Need Proper Assessment

A shower that runs too hot or too cold does not necessarily have a faulty valve.

Temperature problems can be linked to the shower valve, but they may also relate to how hot and cold water reach the shower, other outlets being used at the same time or the wider hot water system. Our guide on why shower temperature keeps changing explains this in more detail.

If the cause appears to lie with a boiler or other heating appliance, that will need a suitably qualified engineer. A shower symptom on its own does not prove a boiler fault.

CALL 01202 125678

REPAIR OR REPLACE

Repairing or Replacing Shower Components

Many shower faults can be repaired by replacing a worn hose, shower head, seal or valve cartridge, or by remaking a leaking connection. In other cases, replacing the shower valve or the whole shower may be more practical.

The right option depends on the shower type, the actual fault, the part affected, its condition, whether compatible parts are still available, the plumbing connections and whether the fault keeps returning. Repair is not always cheaper, and replacement is not always better.

Electric Showers and Safety

Electric showers combine a water supply with an electrical supply. We can advise on the plumbing side, such as a leaking hose or the water supply pipework, but electrical faults and any work that involves opening the unit should be left to a suitably qualified electrician. Electrical Safety First explains how to find a registered electrician.

If water is leaking near a shower unit, light switch or other electrics, keep clear, do not remove any covers and seek appropriate professional help.

HOMES AND BUSINESSES

Shower Repairs for Homes and Commercial Properties

At home, a faulty shower can affect the whole household. In holiday lets, gyms, offices and other commercial premises, a shower out of use can affect guests, staff or customers.

If water is escaping and you can safely reach the isolating valve or stopcock, turning off the supply may help reduce the flow. Please avoid taking apart a shower valve you are not familiar with, as some are easily damaged.

What Can Affect Shower Repair Work?

We do not give fixed prices without understanding the fault first. The work depends on the shower type, the fault, the parts needed and their availability, access to the valve and pipework and whether repair or replacement suits best.

We offer free quotes so you know what is involved before work starts. If water is escaping and you need help quickly, you can contact an emergency plumber in Poole at any time.

COMMON QUESTIONS

Shower Repair FAQs

Why has the flow from my shower changed?

It could be limescale, a damaged hose, a partly closed valve, a worn component or the supply. It needs checking to find the cause.

Does low shower flow always mean low water pressure?

No. Low flow can have several causes, and some of them are within the shower itself rather than the supply.

Why is my shower leaking?

Leaks may come from the head, hose, valve or connections, but water outside a shower can also come from seals, the tray or the screen.

Can a mixer shower be repaired?

Often, yes, depending on the fault and whether compatible parts are available. Sometimes replacing the valve is more practical.

Why does my shower temperature keep changing?

It may relate to the shower valve, other outlets in use or the wider hot water system. It does not necessarily mean the valve is faulty.

Can a plumber repair an electric shower?

We can look at plumbing issues such as a leaking hose or supply pipework. Electrical faults should be handled by a suitably qualified electrician.

What affects the cost of shower repair?

The shower type, the fault, the parts needed and access. We offer free quotes so you know what is involved first.

GET IN TOUCH

Arrange Shower Repair in Poole

If you need shower repair in Poole, call 01202 125678 to describe the fault, or contact us to request a free quote. Our plumbing help is available 24/7.

At Emergency Plumber Poole Pro, we specialise in emergency plumbing help for homes and businesses, available 24/7. Our team deals with leaks, burst pipes and blocked drains across Poole and the surrounding areas.